Foxwell GT60 Plus Bleed ABS for 2006 Hummer H3

Is it possible to try ABS bleeding for the 2006 Hummer H3 (light duty truck) using Foxwell GT60 Plus? If it's, how am I able to do? 

The answer is YES. Please watch the related video that has been tested by the www.foxwelleshop.com engineer.

Main operation guide:

Connect GT60 Plus to the vehicle properly, and start to operate on the tablet.

Tap “Diagnostic”-> “Automatic Read” to scan the VIN automatically

Select “Control Modules”-> “Anti-lock brake system”-> “Special functions”-> “Electronic brake control module” -> “Automated bleed”

Refer to the relevant service documents for extra instructions and info.

1.Turn the ignition ON and press the pedal firmly

2.Depress the pedal firmly

3.Apply the pedal while air is being faraway from the front secondary circuit.

You can release the pedal while the valves are being cooled.

Note: In some cases, you would like to repeat equivalent steps to the front/rear/TCS secondary circuit, just follow the on-screen instruction to work.

Keep pressing the brake pedal

Loose the bleeder screw to allow air to purge from the left rear caliper

Tighten the bleeder screw

Release the brake pedal

Connect hose to the left/right rear caliper bleed screw

Ignition should be in ON position

Press the brake pedal with an assistant

Finally, when the process is completed, release pressure from the GT60 Plus and disconnect the bleed equipment.

Available link to get Foxwell GT60 Plus diagnostic platform: https://www.foxwelleshop.com/wholesale/foxwell-gt60-plus-android-diagnostic-tool.html